TRANSFORM + TERMINAL

Login

Clear
SKU: N/A Categories: ,

Description

The TRANSFORM plate, made of polypropylene, has been specifically studied to satisfy the most particular needs. It can be used to level the ground and also for aerating the modular building’s underside. It allows to create a wide contact surface with the ground below, characteristic that makes it suitable also to unstable and sandy terrains. Furthermore, Transform plates can be used to create walkways and carriageable paths, raising and steps. In fact, these plates can be easily joined together to create the most varied compositions, that will result also elegant thanks to the researched exterior design of the product. Made of polypropylene. Finally, the use of the TERMINAL plate, which protects the plugs from any damage and which allows a perfect alignment between the two products, will allow a safe reuse of the Transform and a compressive strength of 100T.

CERTIFICATE OF COMPRESSION 100T

 

Additional information

Weight 0186-000-1.065 kg
Dimensions 240 × 240 × 25 mm
Color

Grey

Data sheet

Material: charged polypropylene copolymer

 

Application

USE:

This plate is equipped by anchor points which permit to create the stalls or the plinth according to desired dimensions.

  • It can be hooked:

HORIZONTALLY: following the arrows printed on the plate;

VERTICALLY: one above the other hooked through the dowels in order to reach the necessary height.

Finally, before the positioning of the module, the TERMINAL plate is superimposed on the last TRANSFORM to align the product and avoid any damage to the 4 plugs.

Certificate

Download CERTIFICATO MODELLO TRANSFORM
172 KB

You may also like…